Disassembly And Assembly Instructions; Cs-Z20Vkew Cs-Z25Vkew Cs-Z35Vkew Cs-Z42Vkew Cs-Xz20Vkew Cs-Xz25Vkew Cs-Xz35Vkew - Panasonic CU-Z20VKE Series Installation Instruction

Indoor/outdoor unit
Hide thumbs Also See for CU-Z20VKE Series:
Table of Contents

Advertisement

19. Disassembly and Assembly Instructions

High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
19.1 CS-Z20VKEW CS-Z25VKEW CS-Z35VKEW CS-Z42VKEW
CS-XZ20VKEW CS-XZ25VKEW CS-XZ35VKEW
19.1.1
Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
19.1.1.1
To Remove Front Grille
2.
Remove 1 screw at the
middle of front grille.
19.1.1.2
Caps Removal
WARNING
1.
Remove 2 caps and 2 screws at the
bottom of front grille.
Figure 1
Use long nose pliers
to pull out the caps.
141
3.
Hold both sides of the front grille
and gently remove it by pulling up
and toward yourself.
CAUTION
a.
Use a manual screw driver with at least 150 mm shaft
length. Do not use a hand drill type.
b.
Slightly tilt the screw driver handle downward so that the
shaft does not touch the flap. Be careful not to scratch the
flap while undoing the screws.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents