9. Remove the earth wire screw.
8. Detach the lead wires AC308 (Black),
AC307 (Brown), AC304 (Red) and
G301 (Green) from the Terminal Board.
10. Pull out the Main Electronic
Controller halfway.
7. Detach the CN-DISP connector
then remove the Indicator Complete.
Figure 4
Figure 3
153
6. Remove the Particular Piece
from the 3 hooks.
11. Detach all connectors as labelled from the
Main Electronic Controller. Then pull out the
Main Electronic Controller gently.
Figure 5
AC303
CN-FM
CN-STM1
CN-TH