Local Network Setting - Wiznet WizFi630 User Manual

2.3.2. Local network setting

WizFi630 internal IP setting, DHCP server setting and DHCP.
Type
IP Address
Subnet Mask
MAC Address
DHCP Server
Start IP Address
End IP Address
Subnet Mask
Primary DNS Server
Secondary DNS Server
Lease Time
Statically Assigned
© Copyright 2012 WIZnet Co., Ltd. All rights reserved.
Enter the module's IP. (Default Value : 192.168.16.254)
Enter the module's subnet mask.
MAC Address of module's LAN port (Wireless included). (Read Only)
Decide whether the module's DHCP server will be used.
Set the start IP address that will be assigned from the DHCP server
Set the end IP address that will be assigned from the DHCP server.
Enter the value of subnet mask.
Enter the primary DNS server address.
Enter the secondary DNS server address.
Enter the lease time when IP address is assigned.
Maximum of three IP can be statically assigned when IP address is
assigned.
Description
25