Table of Contents
Advertisement
Expansion Unit Model
TL-R1200C-RP
Connecting USB Expansion Units
To connect the device to USB expansion units, USB Type-A to USB Type-C cables are required.
For required accessories details, see
1. Verify that the NAS is powered off.
2. Connect the expansion unit to the NAS.
a. Connect the USB cable to the USB Type-C port on the expansion unit.
b. Connect the USB cable to a USB port on the NAS.
3. Power on the expansion units.
4. Power on the NAS.
5. Verify that the expansion units are recognized by the NAS.
a. Log on to QTS as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.
Description
• Uses a USB 3.2 Gen 2 Type-C
interface
• Supports SATA drives
Expansion Unit
Installation.
TVS-675 User Guide
Required Accessories
• USB 3.2 Gen 2 Type-A to
Type-C cable
• USB 3.2 Gen 2 Type-C to
Type-C cable
• RAIL-B02
Hardware Installation
32
Advertisement
Table of Contents
