Audio Alert - QNAP TVS-675 User Manual

LED
2.5 Gigabit Ethernet Green
speed
Orange
Off
2.5 Gigabit Ethernet Yellow
activity
Flashes yellow
Off
USB Blue
Off

Audio Alert

Duration
Short beep (0.5 seconds) 1
Long beep (1.5 seconds) 3 (every 5 minutes)
Status
Frequency
3
2
1
The network connection is operating at
2.5 Gbps.
The network connection is operating at 1
Gbps.
• The network connection is operating
at 100 Mbps.
• There is no network connection.
A network connection has been
established.
The device is being accessed from the
network.
There is no network connection.
A USB device connected to the front USB
port is detected.
No USB expansion unit has been
detected.
Description
• The NAS is starting up.
• When the reset button is pressed for 3 seconds,
the NAS resets configurations.
• When the reset button is pressed for 10
seconds, the NAS resets configurations and
reboots.
• The firmware was updated.
• Cannot detect installed disk.
The system fan is not functioning.
• The disk volume is about to reach its full
capacity.
• The disk volume has reached its full capacity.
• The drives are in degraded mode.
• The drive is rebuilding.
• The NAS was powered off by force shutdown
(hardware shutdown).
• The NAS was powered on successfully and is
ready.
TVS-675 User Guide
Description
Basic Operations 41