Table of Contents
Advertisement
Installation Requirements
Category
Environment
Hardware and peripherals
Tools
Setting Up the NAS
Important
Read all safety requirements and information carefully before setting up the NAS or
installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
2. Install the drives.
For details, see the following topics:
•
Installing 3.5-inch Drives on 3.5-inch Trays
•
Installing 2.5-inch Drives on 3.5-inch Trays
•
Installing M.2 Solid-State Drives
3. Optional: Install expansion cards.
For details, see
Installing Expansion
4. Optional: Connect the expansion units.
For details, see
Expansion Unit
5. Replace the memory modules.
For details, see
Replacing Memory
6. Connect the power cord and all applicable cables.
7. Power on the NAS.
8. Install QTS.
For details, see
QTS
9. Log on to QTS.
• Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
Storage drives
Tip
For the list of compatible drive models, go to
www.qnap.com/compatibility.
• Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Cards.
Installation.
Modules.
Installation.
TVS-675 User Guide
Item
https://
Product Overview
11
Advertisement
Table of Contents
