Table of Contents
Advertisement
Downloaded from
ManualsNet.com
search engine
Code
Condition/solution
202
The line was disconnected by the recipient's fax machine (models equipped with optional
fax board). Wait a moment, then try again.
203
The product cannot detect a dial tone (models equipped with optional fax board). Make
sure the phone cable is connected correctly and the phone line works. If you connected
the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change
the Line Type setting to PBX. If you still cannot send a fax, turn off the Dial Tone
Detection setting. (Turning off the Dial Tone Detection setting may cause the product to
drop the first digit of a fax number.)
204
The recipient's fax machine is busy (models equipped with optional fax board). Wait a
moment, then try again.
205
The recipient's fax machine does not answer (models equipped with optional fax board).
Wait a moment, then try again.
206
The phone cable is incorrectly connected to the product's LINE and EXT ports (models
equipped with optional fax board). Connect the phone cable correctly.
207
The phone cable is not connected (models equipped with optional fax board). Connect
the phone cable.
208
The fax could not be sent to some of the specified recipients (models equipped with
optional fax board). Print a fax log to check which recipients failed to receive the fax. If the
Save Failure Data setting is turned on, you can resend a fax by selecting Job Status in
the Job/Status menu.
301
There is not enough storage space available to save the data in the external memory
device. Clear space on the device or use a different device.
401
302
The external memory device is write-protected. Disable write protection.
402
303
No folder is available for saving the scanned file. Create a folder or use a different
memory device.
304
The external memory device has been removed. Reinsert the device.
404
305
An error occurred while saving data to an external memory device. Reinsert the memory
device or use a different device.
405
306
The product's memory is full. Wait until current jobs are finished processing.
376
Advertisement
Table of Contents
