Table of Contents
Advertisement
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Related tasks
Checking the Nozzles Using the Product Control Panel
Cleaning the Print Head Using the Product Control Panel
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
Note: This product automatically stores names, telephone numbers, and fax data (models equipped with
an optional fax board) in its internal memory log when faxing or emailing jobs. This product also contains
an encrypted hard drive that is used for storing large and/or authenticated print, copy and scan jobs. You
may erase data stored on the encrypted hard drive by following the steps outlined in the link below or in
the Administrator's Guide. It is recommended that data is erased before disposing or giving away the
product.
1. Press the
home button, if necessary.
2. Select Settings > General Settings > System Administration > Reset.
Note: You may need to enter the administrator password.
381
Downloaded from
ManualsNet.com
search engine
Advertisement
Table of Contents
