Table of Contents
Advertisement
Downloaded from
ManualsNet.com
search engine
2. Select the Paper Source and Output Tray options you want to use.
3. Select Separator Sheet if you want to print a blank sheet of paper in between copies or print jobs.
Note: You can also adjust this setting from the control panel using the Insert Sheets per User
option.
4. Select one of the following Sort options:
• Select Rotate Sort to stack printouts alternately in landscape and portrait orientations. The Paper
Source and Output Tray settings must be set to Auto Select.
• Select Shift Sort to offset each set of copies. The Output Tray setting must be set to Finisher
Tray.
Note: This option is available only when the optional finisher unit is installed.
5. If optional finisher and punch units are installed, you can choose the following options:
• Select a Staple option to choose the staple location on the document.
• Select a Punch option to choose where the holes are punched.
Caution: When using the optional hole punch unit with the optional staple or booklet finisher,
adjust the printed area so it does not overlap with the holes being punched. You should also set
the binding margin so that it is not printed at the hole punch position. Punching holes over any
printed area may cause hole punch failure or a paper jam.
• Select a Fold/Saddle Stitch option to choose the booklet settings.
6. When printing documents of mixed sizes, select Specify Orientation. Click Settings to select
orientation and binding margin options.
Finishing Options - Windows
Parent topic:
Printing with the Standard Epson Printer Software - Windows
Related references
Epson Universal Print Driver Locked Setting Options
Related tasks
Selecting Double-sided Printing Settings - Windows
135
Advertisement
Table of Contents
