Table of Contents
Advertisement
Installing countertop dispensers with legs accessory (P/N AF10LBLEGS)
§ Do not tilt any unit further than 30° off vertical plane .
§ Countertop dispensers that sit on legs (not bolted to counter) can be inadvertently moved . Care should be taken
when operating and cleaning to avoid accidents .
1. Carefully tip dispenser back to expose
underside and block up in place .
2. Screw legs (shipped taped to drain pan of
dispenser) into dispenser bottom, taking
care to seat legs securely against underside
of dispenser .
3. Attach bottom panel and hardware to bottom
of dispenser with supplied screws (Fig. 3) .
4. Position unit in desired location and adjust
legs to level in both directions .
5. Make final connections .
6
E12CI425A 230 V 50 Hz, C12CI425A 220 V 60 Hz
CAUTION!
Fig. 3 - Bottom panel and leg assembly
leg
bottom panel
screw
Advertisement
Table of Contents
