Table of Contents
Advertisement
Non-UI Mode Resolution
Use this feature to specify the resolution for the non-UI text mode. The options are Auto,
80x25, and 100x31.
UI Mode Resolution
Use this feature to specify the resolution for the UI text mode. The options are Auto, 80x25,
and 100x31.
Graphics Mode Resolution
Use this feature to specify the resolution for the graphics mode. The options are Auto,
640x480, 800x600, and 1024x768.
Firmware Update Configuration
Me FW Image Re-Flash
Use this feature to update the Management Engine firmware. The options are Disabled
and Enabled.
Serial Port Console Redirection
COM1
Console Redirection
Select Enabled to enable console redirection support for the serial port. The options are
Enabled and Disabled.
*If the feature above is enabled, the following features are available for configuration:
Console Redirection Settings
This feature allows you to specify how the host computer will exchange data with the client
computer, which is the remote computer.
Terminal Type
This feature allows you to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII Character set. Select VT100+ to add color and function
key support. Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8 to
use UTF8 encoding to map Unicode characters into one or more bytes. The options are
VT100, VT100+, VT-UTF8, and ANSI.
Bits per second
Use this feature to set the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 38400, 57600, and 115200 (bits per second).
73
Chapter 4: BIOS
Advertisement
Table of Contents
