Supermicro X11SSN Series User Manual page 102

Super X11SSN-H/-E/-L User's Manual
5. The screen above indicates that the BIOS update process is complete. When you see
the screen above, unplug the AC power cable from the power supply, clear CMOS, and
plug the AC power cable in the power supply again to power on the system.
6. Press <Del> continuously to enter the BIOS Setup utility.
7. Press <F3> to load the default settings.
8. After loading the default settings, press <F4> to save the settings and exit the BIOS
Setup utility.
102