Table of Contents
Advertisement
The R-Tech Plasma 30DV is a member of our field acclaimed family of welding products.
Premium features include:-
1. Inverter power source – more efficient to operate, provides smoother weld characteristics.
2. Infinite cutting power adjustment, allows fine tuning of cut characteristics
3. HF start – Enables easy arc starting
4. Digital amp meter
5. Quick fitting torch for easy torch fitment/replacement
6. Long life – Low cost torch consumables
7. 35% Duty cycle at 30 Amps 240V / 25Amps 110V @ 40
Recommended Processes
The R-Tech Plasma 30DV is recommended for the plasma cutting processes within its output capacity of
30 Amps DC
Equipment Limitations
The R-Tech Plasma 30DV is protected from overloads beyond the output ratings and duty cycle as per
machine specifications with thermostat protection of the output coils and rectifiers.
Cutting Capability – Duty Cycle
The R-Tech Plasma 30DV is rated at 30 Amps at 35% duty cycle on a ten minute basis. If the duty cycle
is exceeded a thermal protector will shut machine off until the machine cools.
MODEL
Power Voltage
Input Current 240V Fuse Rating
Input Current 110V Fuse Rating
Rated Output Current
Current Adjusting Range
No-load Voltage
Rated Duty Cycle
Working Mode
Air Pressure
Max. Cutting Thickness (Clean cut mild steel)
Max. Cutting Thickness (Severance cut mild steel)
After Flow Time
Dimensions
4
Introduction
Technical Specifications
PLASMA 30DV
110/240V 50/60Hz
13 Amps
32 Amps
30A @ 240V - 25A @ 110V
15-30A @ 240V (15-25A @110V)
200V
35%
HF Contact Start
50 PSI
8mm
12mm
10 Seconds
390 X 190 X 290
º
C
Advertisement
Table of Contents
