R-Tech PLASMA 30DV Operation Instructions Manual page 16

cutting power for job.
Water contamination in torch head, Check for water in water trap at rear of machine, if water is
present, drain air compressor, clean water out of air lines, empty water trap by pressing water
release button on bottom of air regulator water trap. Fit new consumables as per instructions
earlier in this manual
R-Tech Torch Spares
Plasma 30DV
Electrode
Cutting Tip
Ceramic Shield Cup
Gas distributor insulator ring
Torch Head –Hand Held
Torch Complete Hand Held 6M
Plasma Torch Consumables parts list
16
Part No.
P30-EL
P30-CT
P30-SC
P30-GD
P30-THH
P30-4.5MHHT