Interrupt generation via stm trigger, aurix tc2xx microcontroller training (10 pages)
Summary of Contents for Infineon Cypress CYBLE-014008-00
Page 1
The document following this cover page is marked as “Cypress” document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio.
Page 2
General Description RX current consumption of 16.4 mA (radio only) ■ Low power mode support ■ The Cypress CYBLE-014008-00 is a fully certified and qualified Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on ❐ module supporting Bluetooth...
Page 3
CYBLE-014008-00 More Information Cypress provides a wealth of data at www.cypress.com to help you to select the right module for your design, and to help you to quickly and effectively integrate the module into your design. Overview: EZ-BLE Module Portfolio, Module Roadmap Knowledge Base Articles ■...
Page 4
CYBLE-014008-00 Technical Support Frequently Asked Questions (FAQs): Learn more about our Bluetooth LE ECO System. ■ Forum: See if your question is already answered by fellow developers on the PSoC 4 Bluetooth LE forum. ■ Visit our support page and create a technical support case or contact a local sales...
CYBLE-014008-00 Overview Module Description The CYBLE-014008-00 module is a complete module designed to be soldered to the main host board. Module Dimensions and Drawing Cypress reserves the right to select components (including the appropriate Bluetooth LE device) from various vendors to achieve the Bluetooth LE module functionality.
Page 7
CYBLE-014008-00 Figure 1. Module Mechanical Drawing Top View Side View Bottom View (Seen from Bottom) Note 1. No metal should be located beneath or above the antenna area. Only bare PCB material should be located beneath the antenna area. For more information on recommended host PCB layout, see Figure 3 on page 7,...
CYBLE-014008-00 Pad Connection Interface As shown in the bottom view of Figure 1 on page 6, the CYBLE-014008-00 connects to the host board via solder pads on the back of the module. Table 2 Figure 2 detail the solder pad length, width, and pitch dimensions of the CYBLE-014008-00 module. Table 2.
CYBLE-014008-00 Recommended Host PCB Layout Figure 4 through Figure 6 Table 3 provide details that can be used for the recommended host PCB layout pattern for the CYBLE-014008-00. Dimensions are in millimeters unless otherwise noted. Pad length of 0.99 mm (0.494 mm from center of the pad on either side) shown in Figure 6 is the minimum recommended host pad length.
Page 10
CYBLE-014008-00 Table 3 provides the center location for each solder pad on the CYBLE-014008-00. All dimensions are referenced to the center of the solder pad. Refer to Figure 6 for the location of each module solder pad. Table 3. Module Solder Pad Location Figure 6.
CYBLE-014008-00 Digital and Analog Capabilities and Connections Table 4 Table 5 detail the solder pad connection definitions and available functions for each connection pad. Table 4 lists the solder pads on CYBLE-014008-00, the Bluetooth LE device port-pin, and denotes whether the digital function shown is available for each solder pad.
Page 12
CYBLE-014008-00 Table 5. Analog Peripheral Capabilities Pad Number Device Port Pin SARMUX OPAMP LPCOMP Ground Connection ✓ P1.1 (CTBm1_OA0_INN) ✓ P1.0 (CTBm1_OA0_INP) ✓ P1.5 (CTBm1_OA1_INP) P0.1 P0.7 Digital Power Supply Input (1.71 to 5.5V) ✓ P1.4 (CTBm1_OA1_INN) ✓ P0.4 (COMP1_INP) ✓...
CYBLE-014008-00 Power Supply Connections and Recommended External Components Power Connections External Component Recommendation The CYBLE-014008-00 contains three power supply connec- In either connection scenario, it is recommended to place an tions, VDD, VDDA, and VDDR. The VDD and VDDA connections external ferrite bead between the supply and the module supply power for the digital and analog device operation respec- connection.
Page 14
CYBLE-014008-00 Figure 8. Recommended Host Schematic for Independent Supply Option Independent Power Supply Option (Seen from Bottom) Document Number: 002-00023 Rev. *O Page 13 of 46 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from...
Page 15
CYBLE-014008-00 The CYBLE-014008-00 schematic is shown in Figure Figure 9. CYBLE-014008-00 Schematic Diagram Document Number: 002-00023 Rev. *O Page 14 of 46 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from...
CYBLE-014008-00 Critical Components List Table 6 details the critical components used in the CYBLE-014008-00 module. Table 6. Critical Component List Component Reference Designator Description Silicon 68-pin WLCSP PSoC 4 Bluetooth LE Crystal 24.000 MHz, 10PF Crystal 32.768 kHz, 12.5PF Antenna Design Table 7 details antenna used on the CYBLE-014008-00 module.
CYBLE-014008-00 Electrical Specification Table 8 details the absolute maximum electrical characteristics for the Cypress Bluetooth LE module. Table 8. CYBLE-014008-00 Absolute Maximum Ratings Parameter Description Unit Details/Conditions or V supply relative to V –0.5 – Absolute maximum DDD_ABS Direct digital core voltage input relative to V –0.5 –...
Page 18
CYBLE-014008-00 Table 10. CYBLE-014008-00 DC Specifications (continued) Parameter Description Unit Details/Conditions Execute from flash; CPU at 12 MHz – – – T = –40 °C to 85 °C T = 25 °C, Execute from flash; CPU at 24 MHz – –...
CYBLE-014008-00 Table 11. AC Specifications Parameter Description Unit Details/Conditions 1.71 V V 5.5 V CPU frequency – Wakeup from Sleep mode – – Guaranteed by characterization SLEEP µs 24-MHz IMO. Guaranteed by Wakeup from Deep-Sleep mode – – DEEPSLEEP characterization Wakeup from Hibernate mode –...
CYBLE-014008-00 Table 13. GPIO AC Specifications Parameter Description Unit Details/Conditions Rise time in Fast-Strong mode – 3.3-V V = 25 pF RISEF LOAD Fall time in Fast-Strong mode – 3.3-V V = 25 pF FALLF LOAD Rise time in Slow-Strong mode –...
CYBLE-014008-00 Analog Peripherals Opamp Table 16. Opamp Specifications Parameter Description Unit Details/Conditions (Opamp Block Current. V = 1.8 V. No Load) Power = high – 1000 1300 – DD_HI Power = medium – – µA – DD_MED Power = low –...
Page 22
CYBLE-014008-00 Table 16. Opamp Specifications (continued) Parameter Description Unit Details/Conditions From disable to enable, no external RC – T_op_wake – – µs dominating Comp_mode (Comparator Mode; 50-mV Drive, T (Approx.) RISE FALL Response time; power = high – – – Response time;...
Page 23
CYBLE-014008-00 SAR ADC Table 20. SAR ADC DC Specifications Parameter Description Unit Details/Conditions A_RES Resolution – – bits – A_CHNIS_S Number of channels - single-ended – – – 8 full-speed Diff inputs use A-CHNKS_D Number of channels - differential – –...
CYBLE-014008-00 LCD Direct Drive Table 29. LCD Direct Drive DC Specifications Spec ID Parameter Description Unit Details/Conditions 16 × 4 small segment SID228 Operating current in low-power mode – 17.5 – µA LCDLOW display at 50 Hz SID229 LCD capacitance per segment/common driver –...
CYBLE-014008-00 System Resources Power-on-Reset (POR) Table 41. POR DC Specifications Parameter Description Unit Details/Conditions Rising trip voltage 0.80 – 1.45 – RISEIPOR Falling trip voltage 0.75 – 1.40 – FALLIPOR Hysteresis – – IPORHYST Table 42. POR AC Specifications Parameter Description Unit Details/Conditions...
Page 29
CYBLE-014008-00 Table 46. Voltage Monitor AC Specifications Parameter Description Unit Details/Conditions Voltage monitor trip time – – µs – MONTRIP SWD Interface Table 47. SWD Interface Specifications Parameter Description Unit Details/Conditions 3.3 V V 5.5 V SWDCLK 1/3 CPU clock frequency F_SWDCLK1 –...
Page 30
CYBLE-014008-00 Table 53. UDB AC Specifications Parameter Description Unit Details/Conditions Data Path performance Max frequency of 16-bit timer in a UDB – – – MAX-TIMER pair Max frequency of 16-bit adder in a UDB – – – MAX-ADDER pair Max frequency of 16-bit CRC/PRS in a –...
Page 31
CYBLE-014008-00 Table 54. Bluetooth LE Subsystem (continued) Parameter Description Unit Details/Conditions Out-of-band blocking, RF-PHY Specification OBB1 Wanted signal at –67 dBm and Interferer –30 –27 – (RCV-LE/CA/04/C) at F = 30–2000 MHz Out-of-band blocking, RF-PHY Specification OBB2 Wanted signal at –67 dBm and Interferer –35 –27 –...
Page 32
CYBLE-014008-00 Table 54. Bluetooth LE Subsystem (continued) Parameter Description Unit Details/Conditions Transmitter spurious emissions TXSE2 – – -41.5 FCC-15.247 (average), >1.0 GHz RF Current Specifications Receive current in normal mode – 18.7 – – IRX_RF Radio receive current in normal mode –...
CYBLE-014008-00 Environmental Specifications Environmental Compliance This Cypress Bluetooth LE module is built in compliance with the Restriction of Hazardous Substances (RoHS) and Halogen Free (HF) directives. The Cypress module and components used to produce this module are RoHS and HF compliant. RF Certification The CYBLE-014008-00 module is certified under the following RF certification standards: FCC ID: WAP4008...
CYBLE-014008-00 Regulatory Information FCC NOTICE: The device CYBLE-014008-00 complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407. Transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
CYBLE-014008-00 ISED Innovation, Science and Economic Development Canada (ISED) Certification CYBLE-014008-00 is licensed to meet the regulatory requirements of Innovation, Science and Economic Development Canada (ISED). License: IC: 7922A-4008 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
CYBLE-014008-00 MIC Japan CYBLE-014008-00 is certified as a module with type certification number 203-JN0505. End products that integrate CYBLE-014008-00 do not need additional MIC Japan certification for the end product. End product can display the certification label of the embedded module. KC Korea CYBLE-014008-00 is certified for use in Korea with certificate number MSIP-CRM-Cyp-4008.
CYBLE-014008-00 Packaging Table 56. Solder Reflow Peak Temperature Maximum Time at Peak Module Part Number Package Maximum Peak Temperature No. of Cycles Temperature CYBLE-014008-00 32-pad SMT 260 °C 30 seconds Table 57. Package Moisture Sensitivity Level (MSL), IPC/JEDEC J-STD-2 Module Part Number Package CYBLE-014008-00 32-pad SMT...
Page 38
CYBLE-014008-00 Figure 12 details reel dimensions used for the CYBLE-014008-00. Figure 12. Reel Dimensions The CYBLE-014008-00 is designed to be used with pick-and-place equipment in an SMT manufacturing environment. The center-of-mass for the CYBLE-014008-00 is detailed in Figure Figure 13. CYBLE-014008-00 Center of Mass Document Number: 002-00023 Rev.
CYBLE-014008-00 Ordering Information Table 58 lists the CYBLE-014008-00 part number and features. Table 59 lists the reel shipment quantities for the CYBLE-014008-00. Table 58. Ordering Information Features ✓ ✓ ✓ CYBLE-014008-00 1 Msps 32-SMT Table 59. Tape and Reel Package Quantity and Minimum Order Amount Description Minimum Reel Quantity Maximum Reel Quantity...
CYBLE-014008-00 Acronyms Table 60. Acronyms Used in this Document (continued) Table 60. Acronyms Used in this Document Acronym Description Acronym Description EMIF external memory interface ABUS analog local bus end of conversion analog-to-digital converter end of frame analog global EPSR execution program status register AMBA (advanced microcontroller bus electrostatic discharge...
Page 41
CYBLE-014008-00 Table 60. Acronyms Used in this Document (continued) Table 60. Acronyms Used in this Document (continued) Acronym Description Acronym Description multiply-accumulate C serial data microcontroller unit sample and hold Ministry of Internal Affairs and Communications SINAD signal to noise and distortion ratio (Japan) special input/output, GPIO with advanced MISO...
CYBLE-014008-00 Document Conventions Units of Measure Table 61. Units of Measure Symbol Unit of Measure °C degrees Celsius decibel decibel-milliwatts femtofarads hertz 1024 bytes kbps kilobits per second kilohour kilohertz k kilo ohm ksps kilosamples per second least significant bit Mbps megabits per second megahertz...
CYBLE-014008-00 Document History Page Document Title: CYBLE-014008-00, EZ-BLE™ Creator Module Document Number: 002-00023 Submission Revision Description of Change Date 4895738 08/26/2015 Preliminary data sheet for CYBLE-014008-00 module. 4910660 09/07/2015 Updated Pad Connection Interface: Update Table Replaced 21 with 32 under “Connections” column. Updated Digital and Analog Capabilities and Connections:...
Page 44
CYBLE-014008-00 Document History Page (continued) Document Title: CYBLE-014008-00, EZ-BLE™ Creator Module Document Number: 002-00023 Submission Revision Description of Change Date 5060713 01/07/2016 Updated General Description: Updated description. Added hyperlinks in required places. Added More Information. Updated Overview: Updated Module Description: Updated Module Dimensions and Drawing:...
Page 45
CYBLE-014008-00 Document History Page (continued) Document Title: CYBLE-014008-00, EZ-BLE™ Creator Module Document Number: 002-00023 Submission Revision Description of Change Date 5146846 02/22/2016 Updated Digital and Analog Capabilities and Connections: Updated Table Updated details under “TCPWM” column (to add Positive (P) and Negative (N) indicator to TCPWM functionalities).
Page 46
CYBLE-014008-00 Document History Page (continued) Document Title: CYBLE-014008-00, EZ-BLE™ Creator Module Document Number: 002-00023 Submission Revision Description of Change Date 6086513 03/08/2018 Updated Document Title to read as “CYBLE-014008-00 EZ-BLE™ Creator Module”. ® Replaced “PSoC Module” and “PSoC Module” with “Creator Module” in all instances across the document.
CYBLE-014008-00 Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. ® Products PSoC Solutions ®...