Spi master communication via asclin module (10 pages)
Summary of Contents for Infineon Cypress EZ-BLE CYBLE-022001-00
Page 1
The document following this cover page is marked as “Cypress” document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio.
Page 2
CYBLE-022001-00 EZ-BLE™ Creator Module EZ-BLE™ Creator Module General Description RX current consumption of 16.4 mA (radio only) ■ Low power mode support ■ The Cypress CYBLE-022001-00 is a fully certified and qualified Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on ®...
Page 3
CYBLE-022001-00 More Information Cypress provides a wealth of data at www.cypress.com to help you to select the right module for your design, and to help you to quickly and effectively integrate the module into your design. Overview: EZ-BLE Module Portfolio, Module Roadmap Knowledge Base Articles ■...
Page 4
CYBLE-022001-00 Technical Support Frequently Asked Questions (FAQs): Learn more about our Bluetooth LE ECO System. ■ Forum: See if your question is already answered by fellow developers on the PSoC 4 Bluetooth LE forum. ■ Visit our support page and create a technical support case or contact a local sales...
CYBLE-022001-00 Overview Module Description The CYBLE-022001-00 module is a complete module designed to be soldered to the applications main board. Module Dimensions and Drawing Cypress reserves the right to select components (including the appropriate Bluetooth LE device) from various vendors to achieve the Bluetooth LE module functionality.
Page 7
CYBLE-022001-00 Figure 1. Module Mechanical Drawing Top View (See from Top) Side View Bottom View (Seen from Bottom) Note 1. No metal should be located beneath or above the antenna area. Only bare PCB material should be located beneath the antenna area. For more information on recommended host PCB layout, see “Recommended Host PCB Layout”...
CYBLE-022001-00 Pad Connection Interface As shown in the bottom view of Figure 1 on page 6, the CYBLE-022001-00 connects to the host board via solder pads on the back of the module. Table 2 Figure 2 detail the solder pad length, width, and pitch dimensions of the CYBLE-022001-00 module. Table 2.
CYBLE-022001-00 Recommended Host PCB Layout Figure Figure Figure 6, and Table 3 provide details that can be used for the recommended host PCB layout pattern for the CYBLE-022001-00. Dimensions are in millimeters unless otherwise noted. Pad length of 0.91 mm (0.455 mm from center of the pad on either side) shown in Figure 6 is the minimum recommended host pad length.
Page 10
CYBLE-022001-00 Table 3 provides the center location for each solder pad on the CYBLE-022001-00. All dimensions are referenced to the center of the solder pad. Refer to Figure 6 for the location of each module solder pad. Table 3. Module Solder Pad Location Figure 6.
CYBLE-022001-00 Digital and Analog Capabilities and Connections Table 4 details the solder pad connection definitions and available functions for each connection pad. Table 4 lists the solder pads on CYBLE-022001-00, the Bluetooth LE device port-pin, and denotes whether the function shown is available for each solder pad. Each ✓...
CYBLE-022001-00 Power Supply Connections and Recommended External Components Power Connections External Component Recommendation The CYBLE-022001-00 contains two power supply connections, In either connection scenario, it is recommended to place an VDD and VDDR. The VDD connection supplies power for both external ferrite bead between the supply and the module digital and analog device operation.
Page 13
CYBLE-022001-00 The CYBLE-022001-00 schematic is shown in Figure Figure 9. CYBLE-022001-00 Schematic Diagram Document Number: 001-95662 Rev. *N Page 12 of 41...
CYBLE-022001-00 Electrical Specification Table 7 details the absolute maximum electrical characteristics for the Cypress Bluetooth LE module. Table 7. CYBLE-022001-00 Absolute Maximum Ratings Parameter Description Units Details/Conditions Analog, digital, or radio supply relative to V –0.5 – Absolute maximum DDD_ABS Direct digital core voltage input relative to V –0.5 –...
Page 16
CYBLE-022001-00 Table 9. CYBLE-022001-00 DC Specifications (continued) Parameter Description Units Details/Conditions Execute from flash; CPU at 12 MHz – – – T = –40 °C to 85 °C T = 25 °C, Execute from flash; CPU at 24 MHz – –...
CYBLE-022001-00 Table 10. AC Specifications Parameter Description Units Details/Conditions 1.71 V V 5.5 V CPU frequency – Wakeup from Sleep mode – – Guaranteed by characterization SLEEP µs 24-MHz IMO. Guaranteed by Wakeup from Deep-Sleep mode – – DEEPSLEEP characterization Wakeup from Hibernate mode –...
Page 18
CYBLE-022001-00 Table 12. GPIO AC Specifications Parameter Description Units Details/Conditions Rise time in Fast-Strong mode – 3.3-V V = 25 pF RISEF LOAD Fall time in Fast-Strong mode – 3.3-V V = 25 pF FALLF LOAD Rise time in Slow-Strong mode –...
CYBLE-022001-00 XRES Table 15. XRES DC Specifications Parameter Description Units Details/Conditions Input voltage HIGH threshold 0.7 × V – – CMOS input Input voltage LOW threshold – – 0.3 × V Pull-up resistor k – PULLUP Input capacitance – – –...
Page 20
CYBLE-022001-00 Table 19. SAR ADC AC Specifications Parameter Description Units Details/Conditions Measured at 1-V A_PSRR Power-supply rejection ratio – – reference A_CMRR Common-mode rejection ratio – – – 806 Ksps for More Part A_SAMP Sample rate – – Msps Numbers devices SAR operating speed without external ref.
CYBLE-022001-00 Digital Peripherals Timer Table 20. Timer DC Specifications Parameter Description Units Details/Conditions Block current consumption at 3 MHz – – TIM1 Block current consumption at 12 MHz – – µA 16-bit timer TIM2 Block current consumption at 48 MHz –...
Page 22
CYBLE-022001-00 Pulse Width Modulation (PWM) Table 24. PWM DC Specifications Parameter Description Units Details/Conditions Block current consumption at 3 MHz – – PWM1 Block current consumption at 12 MHz – – µA 16-bit PWM PWM2 Block current consumption at 48 MHz –...
CYBLE-022001-00 Serial Communication Table 28. Fixed I C DC Specifications Parameter Description Units Details/Conditions Block current consumption at 100 kHz – – – I2C1 Block current consumption at 400 kHz – – – I2C2 µA Block current consumption at 1 Mbps –...
CYBLE-022001-00 Memory Table 36. Flash DC Specifications Parameter Description Units Details/Conditions Erase and program voltage 1.71 – – Number of Wait states at 32–48 MHz – – CPU execution from flash WS48 Number of Wait states at 16–32 MHz – –...
Page 26
CYBLE-022001-00 Internal Main Oscillator Table 45. IMO DC Specifications Parameter Description Units Details/Conditions IMO operating current at 48 MHz – – 1000 – IMO1 IMO operating current at 24 MHz – – – IMO2 IMO operating current at 12 MHz –...
Page 27
CYBLE-022001-00 Table 50. Bluetooth LE Subsystem (continued) Parameter Description Units Details/Conditions Adjacent channel interference RF-PHY Specification Wanted signal at –67 dBm and Interferer – (RCV-LE/CA/03/C) at FRX ±1 MHz Adjacent channel interference RF-PHY Specification Wanted signal at –67 dBm and Interferer –...
Page 28
CYBLE-022001-00 Table 50. Bluetooth LE Subsystem (continued) Parameter Description Units Details/Conditions RF-PHY Specification FTX, ACC Frequency accuracy –150 – (TRM-LE/CA/06/C) RF-PHY Specification FTX, MAXDR Maximum frequency drift –50 – (TRM-LE/CA/06/C) RF-PHY Specification FTX, INITDR Initial frequency drift –20 – (TRM-LE/CA/06/C) kHz/ RF-PHY Specification FTX, DR...
CYBLE-022001-00 Environmental Specifications Environmental Compliance This Cypress Bluetooth LE module is built in compliance with the Restriction of Hazardous Substances (RoHS) and Halogen Free (HF) directives. The Cypress module and components used to produce this module are RoHS and HF compliant. RF Certification The CYBLE-022001-00 module is certified under the following RF certification standards: FCC: WAP2001...
CYBLE-022001-00 Regulatory Information FCC NOTICE: The device CYBLE-022001-00, including the antenna 2450AT18B100 from Johanson Technology, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
CYBLE-022001-00 ISED Innovation, Science and Economic Development Canada (ISED) Certification CYBLE-022001-00 is licensed to meet the regulatory requirements of Innovation, Science and Economic Development Canada (ISED). License: IC: 7922A-2001 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
CYBLE-022001-00 MIC Japan CYBLE-022001-00 is certified as a module with type certification number 005-101007. End products that integrate CYBLE-022001-00 do not need additional MIC Japan certification for the end product. End product can display the certification label of the embedded module. ...
CYBLE-022001-00 Anatel Brazil CYBLE-022001-00 has type approval in Brazil with identification number 06800-19-11443. Módulo: CYBLE-022001-00 Document Number: 001-95662 Rev. *N Page 32 of 41...
CYBLE-022001-00 Packaging Table 52. Solder Reflow Peak Temperature Maximum Time at Peak Module Part Number Package Maximum Peak Temperature No. of Cycles Temperature CYBLE-022001-00 21-pad SMT 260 °C 30 seconds Table 53. Package Moisture Sensitivity Level (MSL), IPC/JEDEC J-STD-2 Module Part Number Package CYBLE-022001-00 21-pad SMT...
Page 35
CYBLE-022001-00 Figure 12 details reel dimensions used for the CYBLE-022001-00. Figure 12. Reel Dimensions The CYBLE-022001-00 is designed to be used with pick-and-place equipment in an SMT manufacturing environment. The center-of-mass for the CYBLE-022001-00 is detailed in Figure Figure 13. CYBLE-022001-00 Center of Mass Document Number: 001-95662 Rev.
CYBLE-022001-00 Ordering Information Table 54 lists the CYBLE-022001-00 part number and features. Table 55 lists the reel shipment quantities for the CYBLE-022001-00. Table 54. Ordering Information Flash 12-Bit Part Number Speed Size CapSense TCPWM Package Packing (MHz) (KB) Tape and CYBLE-022001-00 1 Msps 21-SMT...
CYBLE-022001-00 Acronyms Acronym Description Bluetooth Low Energy Bluetooth SIG Bluetooth Special Interest Group European Conformity Canadian Standards Association electromagnetic interference electrostatic discharge Federal Communications Commission GPIO general-purpose input/output Industry Canada integrated design environment Korea Certification Ministry of Internal Affairs and Communications (Japan) printed circuit board receive QDID...
CYBLE-022001-00 Document History Page Document Title: CYBLE-022001-00, EZ-BLE™ Creator Module Document Number: 001-95662 Submission Revision Description of Change Date 4662055 02/18/2015 Preliminary data sheet for CYBLE-022001-00 module. 4679323 03/09/2015 Updated Overview: Updated Module Description: Updated Module Dimensions and Drawing: Updated Figure 1 (Updated Module Pad Assignment).
Page 39
CYBLE-022001-00 Document History Page (continued) Document Title: CYBLE-022001-00, EZ-BLE™ Creator Module Document Number: 001-95662 Submission Revision Description of Change Date 5058970 12/14/2015 Updated General Description: Updated description. Added hyperlinks in required places. Added More Information. Updated Overview: Updated Module Description: Updated Module Dimensions and Drawing:...
Page 40
CYBLE-022001-00 Document History Page (continued) Document Title: CYBLE-022001-00, EZ-BLE™ Creator Module Document Number: 001-95662 Submission Revision Description of Change Date 5148398 02/22/2016 Updated General Description: Updated Module Description: Re-ordered descriptions. No change to content. Updated Overview: Updated Module Description: Updated Module Dimensions and Drawing: Updated...
Page 41
CYBLE-022001-00 Document History Page (continued) Document Title: CYBLE-022001-00, EZ-BLE™ Creator Module Document Number: 001-95662 Submission Revision Description of Change Date 5553544 12/14/2016 Updated Electrical Specification: Updated ADC: Updated Table Added Note 9 and referred the same note in “Details/Conditions” column corresponding to A_CHNIS_S and A-CHNKS_D parameters.
CYBLE-022001-00 Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. ® Products PSoC Solutions ®...