Table of Contents
Advertisement
Information for Distributors and Healthcare Providers
Resetting the Pump
The pump remembers user settings and therefore it is important to reset the pump to its
original factory settings when placing the device on a new patient. To reset the usage
meter and return the pump to factory settings:
• Begin with pump turned off
• Press and hold the power button for 30 seconds
• You will hear a series of beeps then at 30 seconds you will hear 4 quick beeps the
LED will flash green.
• Release the power button
Contact Information
Manufacturer
Bio Compression Systems, Inc.
120 West Commercial Avenue
Moonachie, NJ 07074, USA
Phone: +1-201-939-0716
Toll-Free Phone (US): 800-888-0908
E-mail: biosystems@biocompression.com
Website: www.biocompression.com
When contacting us, please have your model number and serial number ready.
Authorized European Representative
Emergo Europe
Prinsessegracht 20
2514 AP, The Hague
The Netherlands
14
Advertisement
Table of Contents
Need help?
Do you have a question about the Vascu-Ease IC-1200-WH and is the answer not in the manual?
Questions and answers