Bio Compression Systems Vascu-Ease IC-1200-WH Instructions For Use Manual page 12

• Dispose of in an environmentally responsible manner in accordance with regional
requirements
• Contact Bio Compression Systems if you have questions or concerns regarding
disassembly and disposal
Manufacturer's EMC Declaration
Electromagnetic Emissions
The device is intended for use in the electromagnetic environment specified below. The
customer or user of the device should assure that it is used in such an environment.
Emissions
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Electromagnetic Immunity
Immunity Test
IEC 61000-4-2 Electrostatic Discharge
Immunity
IEC 61000-4-3 Radiated RF Field
Immunity
IEC 61000-4-3 Proximity Fields from
RF Wireless Communications
Equipment
IEC 61000-4-4 Electrical Fast
Transients
IEC 61000-4-5 Surge Immunity
IEC 61000-4-6 Conducted RF
Immunity
IEC 61000-4-8 Magnetic Field
Immunity
IEC 61000-4-11 Voltage Dips
IEC 61000-4-11 Voltage Interruptions
Compliance
Group 1 The device uses RF energy only for its internal functions. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
Class B
Not The device is suitable for use in all establishments, including domestic
applicable establishments and those directly connected to the public low voltage power supply
network that supplies building used for domestic purposes.
Not
applicable
Immunity Test Level
±8kV Contact, ±2, 4, 8, 15kV Air
80MHz – 2.7GHz: 10V/m, 80% AM at
IEC 60601-1-2, Section 8.10, Table 9
±2kV (Power), ±1kV (Signal), 100kHz
Repetition Frequency
±0.5, 1, 2kV Line-PE, ±0.5, 1kV Line-
3V: 150kHz - 80MHz, 6V in Amateur
Radio & ISM Bands, 80% AM at 1kHz
30A/m, 50 or 60Hz
0% U / 0.5 Cycles, 0% U
T
Cycles, 70% U
0% U
Electromagnetic Environment - Guidance
Discharge
1kHz
Line
/ 1.0
T
/ 25/30 Cycles
T
/ 250/300 Cycles
T
12
Compliance Level
±8kV Contact, ±2, 4, 8, 15kV Air
Discharge
80MHz – 2.7GHz: 10V/m, 80% AM at
1kHz
IEC 60601-1-2, Section 8.10, Table 9
±2kV (Power), ±1kV (Signal), 100kHz
Repetition Frequency
±0.5, 1, 2kV Line-PE, ±0.5, 1kV Line-
Line
3V: 150kHz - 80MHz, 6V in Amateur
Radio & ISM Bands, 80% AM at 1kHz
90A/m, 50 or 60Hz
0% U / 0.5 Cycles, 0% U
T
Cycles, 70% U / 25/30 Cycles
T
0% U / 250/300 Cycles
T
/ 1.0
T