Information For Distributors And Healthcare Providers; Contact Information - Bio Compression Systems SC-3008-DL Operating Instructions Manual

Information for Distributors and Healthcare Providers

Resetting the Pump
The pump remembers user settings and therefore it is important to reset the pump to its
original factory settings when placing the device on a new patient. To reset the usage
meter and return the pump to factory settings:
• Begin with pump turned off and hold the MODE, UP, and DOWN buttons for 5
seconds.
• LED Readout will light up.
• Release the buttons and then press the MODE button.

Contact Information

Manufacturer
Bio Compression Systems, Inc.
120 West Commercial Avenue
Moonachie, NJ 07074, USA
Phone: +1-201-939-0716
Toll-Free Phone (US): 800-888-0908
E-mail: biosystems@biocompression.com
Website: www.biocompression.com
When contacting us, please have your model number and serial number ready.
Authorized European Representative
Emergo Europe
Prinsessegracht 20
2514 AP, The Hague
The Netherlands
L-046 L EN 2020-04
16