Quick Reference - Supermicro SuperServer SYS-2029U-E Series User Manual

SuperServer 2029U-E Series User's Manual

Quick Reference

Jumper Description
JBT1 CMOS Clear
JWD1 Watch Dog
Connector Description
BP PWR1/2/3/4 8-pin power connectors 1/2/3/4 for backplane use
BT1 Onboard battery
COM1 COM port (COM1) on the I/O backplane
FAN1 - FAN8 System/CPU fan headers
GPU PWR1/2/3/4 8-pin power connectors 1/2/3/4 used for GPU devices
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0-3, I-SATA4-7 Intel PCH SATA 3.0 ports (0-3, 4-7)
JF1 Front control panel header
JHFI1/JHFI2 Host Fabric Interface sideband connection headers—not supported in this system
JIPMB1 4-pin BMC external IC header (for an IPMI card)
JL1 Chassis intrusion header
NVMe SMBus (I
JNVI
C1/2 (a proprietary NVMe add-on card and cable are required; available only for Supermicro
2
complete systems)
JRK1 RAID_Key for onboard NVMe devices
JSD1/JSD2 SATA DOM power connectors 1/2
JSDCARD1 Micro SD card slot (reserved for manufacture use)
JTPM1 Trusted Platform Module/Port 80 connector
JUIDB2 UID (Unit Identifier) switch
JVGA2 Front VGA Port
JVRM1/JVRM2 VRM I2C headers
P1_NVMe0/1 &
Non-Volatile Memory Express (NVMe) 3.0 devices 0/1 supported by CPU1 & CPU2
P2_NVMe0/1
PSU1/PSU2 Power Supply Unit (PSU) Connector 1/Power Supply Unit Connector 2
S-SATA0-3 SATA 3.0 ports 0-3 supported by Intel SCU chip
S-SATA4/S-SATA5 SATA3.0 ports with power-pin built-in w/support of SuperDOM (Device-On Module)
SP1 Internal speaker/buzzer
PCIe 3.0 (x16 + x16) slot supported by CPU2 for proprietary riser card (w/left riser card
SXB1A/SXB1B/SXB1C
support)
SXB2 PCIe 3.0 x8 (in x16) slot supported by CPU2 for center right riser card support
PCIe 3.0 (x16 + x16 + x8) slot from CPU1 for far_right ultra riser (SAS3 AOM & LAN
SXB3A/SXB3B/SXB3C
options)
T-SGPIO3 Serial_Link General Purpose I/O header for S-SATA4/5
USB0/1 Backplane Universal Serial Bus (USB) 3.0 ports 0/1
USB3/4 Front Accessible USB 3.0 header for USB 3/4 connections
USB2 USB 3.0 Type A Header
VGA VGA Port
C) headers used for PCIe hot-plug SMBus clock and data connections
2
14
Default Setting
Open (Normal)
Pins 1-2 (Reset)