Table of Contents
Advertisement
5-6. Weighing range for the EW-i series
The EW-i series have three weighing ranges, and the display shows which range
the weight value belongs to with the mark R1, R2 or R3.
There is a function setting to select how the weighing range changes.
Select from automatic range (rng 1), manual range (rng 0) or fixed range (rng 2
to 4).
Operation
Function setting
rng 1
rng 0
rng 2 to 4
(
)
*
This function will not be available for some of legally certified models.
Automatic range
When the weight value exceeds the maximum value of
the range, the weighing range changes automatically
from a lower to a higher weighing range.
When there is nothing on the weighing pan and the
display shows zero with the ZERO mark, the weighing
range changes from a higher to the lowest range.
When the RE-ZERO key is pressed in a higher range,
the balance will be tared to zero and the weighing range
changes to the lowest range.
Manual range
Press the
SAMPLE
weight value (neither counting nor % display). The
weighing range changes to a higher range at any load.
Press the SAMPLE key to change from a higher to the
lowest range, when there is nothing on the weighing pan
and the display shows zero with the ZERO mark.
When the RE-ZERO key is pressed in a higher range,
the balance will be tared to zero and the weighing
range changes to the lowest range. If the weight of the
object is not more than 2% of the weighing capacity, the
RE-ZERO
key doesn't tare, but zeroes the balance
and the weighing range doesn't change.
Press the SAMPLE key to change the weighing range
at zero display.
(
)
Fixed range
*
The weighing range is fixed. Set the function to the
weighing range according to the purpose.
9
Operation
key when the display shows a
Advertisement
Table of Contents
