Product Extensions - Lenze M55BH063S04 Mounting And Switch-On Instructions

Product extensions

Mounting instructions for shrink disc cover
NOTICE
▶ The loosely enclosed cover is mounted as a protection against accidental contact with the
shrink disc.
Gearboxes G50AB45 ... G50BB182
Press the cover with integrated mounting pins into the bore holes on the housing flange
Gearboxes G50BB215 ... G50BB243
1 Shrink disc cover
2 Cheese head screw
3 Reducing bush
1. Screw reducing bushes (3) into the threaded holes on the housing flange so that they are
flush using a screwdriver.
2. Fasten the cover over the reducing bushes (3) using cheese head screws (2).
Mounting instructions for hose-proof hollow shaft cover
NOTICE
▶ The loosely enclosed hollow shaft cover is fitted to seal the hollow shaft bore.
Mechanical installation
X
X
X
X
Mounting
Product extensions
1
2
3
31