Mechanical installation
Mounting
Product extensions
Product extensions
Mounting instructions for shrink disc cover
NOTICE
▶ The loosely enclosed cover is mounted as a protection against accidental contact with the
shrink disc.
Gearboxes G50BS113 ... G50BS195
Press the cover with integrated mounting pins into the bore holes on the housing flange
Gearboxes G50BS221 ... G50BS245
1
Shrink disc cover
2
Cheese head screw
3
Reducing bush
1. Screw reducing bushes (3) into the threaded holes on the housing flange so that they are
flush using a screwdriver.
2. Fasten the cover over the reducing bushes (3) using cheese head screws (2).
32
X
X
X
X
1
2
3