Mechanical installation
Important notes
Install the product according to the information in the chapter "Standards and operating
•
conditions".
4Standards and operating conditions
The technical data and the data regarding the supply conditions can be found on the
•
nameplate and in this documentation.
Ambient media − especially chemically aggressive ones − may damage shaft sealing rings,
•
lacquers and plastics.
Lenze offers special surface and corrosion protection in this case.
•
Only install the gearbox in the mounting position shown.
•
4Mounting positions
^ 20
Preparation
Protect shaft sealing rings from contact with solvents.
•
Remove protection covers from shafts.
•
Thoroughly remove anticorrosion agents from the shaft and from flange faces.
•
Draw the transmission elements onto the output shaft only by using the centering thread.
•
Align the output shaft and transmission elements exactly to avoid tensions.
•
Mount belt pulleys, sprockets, or gear wheels as close as possible to the shaft shoulder in
•
order to keep the bending load of the shaft and the bearing forces at a minimum level.
Tighten all screw connections with the specified torques and secure them with standard
•
screw locking adhesive.
Check paint for damage and repair professionally.
•
^ 66
Mechanical installation
Important notes
19