Operation And Configuration; Introduction To The Operation - Ivoclar Vivadent 747827AA Operating Instructions Manual

5. Operation and Configuration

5.1 Introduction to the operation

5.1.1 Control unit
The Programat P510 is equipped with a widescreen colour display. The furnace can be intuitively operated by means of the
membrane-sealed keypad and the touch screen. The touch buttons can be actuated by slightly tapping the display with the
fingertip and the furnace runs the desired function.
Programat
P510
POWER
SAVING
P
The user interface in the display is divided into three sections:
1. Information bar
(e.g. indication of the current furnace temperature, selected program type, etc.)
2. Main screen (e.g. editing firing programs, changing the settings, etc.)
3. Navigation bar (e.g. scrolling, scrolling in higher levels, calling up favourite programs, etc.)
Farben Frontfolie :
= Ausstanzung
1.99 FFR = RAL 7012 Basaltgrau
5.1.2 Explanation of key functions
2.99 FFR = RAL 5002 Ultramarinblau
3.99 FFR = RAL 6024 Verkehrsgrün
4.99 FFR = RAL 3020 Verkehrsrot
Key
5.99 FFR = RAL 7035 Lichtgrau
6.99 FFR = RAL 9016 Verkehrsweiß
7.99 FFR = RAL 1018 Zinkgelb
8.99 FFR = RAL 2003 Pastellorange
9.99 FFR = RAL 6024 Verkehrsgrün
10.99 FFR = RAL 3020 Verkehrsrot
11.99 FFR = RAL 5002 Ultramarinblau
12.99 FFR = RAL 7035 Lichtgrau (Hinterdruck)
13.99 FFR = RAL 9016 Verkehrsweiß Verschwindeef. 0505.9003.444.72
PREDRYING
0505.7012.000.00
0505.5002.000.00
0505.6024.000.00
0505.3020.000.00
Function
0505.7035.000.00
0505.9003.000.00
Home
0505.1018.000.00
0505.2003.000.00
Switch to home screen (main menu).
0505.6024.000.00
0505.3020.000.00
Program key
0505.5002.000.00
0505.7035.000.00
Press once: Display of the currently selected program.
Press twice: Switch to the program selection via number entry.
IRT key
With this key, the infrared image of the object can be displayed during the closing
process.
Power-saving key
Power-saving function activated (only possible with the furnace head closed and the
furnace on idle). The display shows the power-saving icon. Pressing any key ends the
power- saving function.
Open furnace head
Quick cooling with the furnace head open:
If the furnace head is completely open and the OPEN FURNACE HEAD key is pressed
again, the quick cooling function is activated, e.g. the vacuum pump is switched on for
5 minutes. This function can be stopped at any time by pressing STOP, CLOSE FURNACE
HEAD or START. This function can be activated any time when the furnace head is open.
Close furnace head
T S O P
START
Hinweise :
Abmessungen siehe Fertigungszeichnung
Farben der Zeichnung entsprechen nicht den Siebdruckfarben
Kunden-Artikel Nr. : P510
Maße ohne
= Lochpfeife %%c= 2.8
L
Toleranzangabe:
= Fanger %%c= 6 H7
bis 300 %%P0,2
über 300 %%P0,3
Datum
Gez. 19.07.16
Gepr.
19.07.16
Index Änderung Datum Name Es gilt Urheberschutz nach DIN 34
Maßstab Oberfläche:
-
1:1 Werkstoff:
Siehe Stückliste
Format
-
Werkzeug-Nr.:
A3
Name
1059.0013.001.99
Projekt-Nr.:
SJ
SJ
Druckzeichnung
Bezeichnung:
d110.2604_Modi_99_-
Zeichn.-Nr.:
Blatt 1 von 1
23