Configure Email - HIKVISION BCS-V-NVRXX02-4K Series User Manual

Step 1 Go to System > Network > Advanced > SNMP.
Step 2 Check Enable. A message will pop up to prompt possible security risk and click Yes to continue.
Step 3 Configure the SNMP settings as needed.
 Trap Address: IP address of the SNMP host.
 Trap Port: Port of the SNMP host.
Step 4 Click Apply.

15.7 Configure Email

Purpose
The system can be configured to send an Email notification to all designated users when a
specified event occur, such as an alarm or motion event is detected, or the administrator password
is changed, etc.
Before You Start
Network Video Recorder User Manual
Figure 15-6 SNMP Settings
148