Step 1 Go to Camera > Camera >PoE Settings.
Step 2 Enable or disable long network cable mode by selecting Long Distance or Short Distance
radio.
Long Distance: Long-distance (100 to 300 meters) network transmissions via POE interface.
Short Distance: Short-distance (< 100 meters) network transmission via POE interface.
The PoE ports are enabled with the short distance mode by default.
The bandwidth of IP camera connected to the PoE via long network cable (100 to 300
meters) cannot exceed 6 MP.
The allowed max. long network cable may be less than 300 meters depending on different
IP camera models and cable materials.
When the transmission distance reaches 100 to 250 meters, you must use the CAT5E or
CAT6 network cable to connect with the PoE interface.
When the transmission distance reaches 250 to 300 meters, you must use the CAT6
network cable to connect with the PoE interface.
Refer to the Appendix Błąd! Nie można odnaleźć źródła odwołania.Błąd! Nie można
odnaleźć źródła odwołania. for the list of IP cameras.
Step 3 Click Apply.
Network Video Recorder User Manual
Figure 3-4 PoE Settings
41