MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
3. SETUP
Enter the setup menu on the Web Viewer.
3-1. Information
Shows the overall information about the system such as Model name, MAC address,
IP address, Zeroconf, IP address, Hardware version, Firmware version, Server time,
Running time, CPU usage, Inbound/Outbound Bandwidth and Open source list.
3-2. Video & Image
3-2-1. Source
• SIGNAL : Set NTSC/PAL mode depending on TV system. Generally set to NTSC in
60Hz area and PAL in 50Hz area for the electrical power system of your country.
Changes will restart the camera.
Smart Stream
XXX-XXXXXXXXXX
XX
X.X.X.XXX
XXXX
XXXXxXXXX@XXfps
26