Eneo ICB-62M0550MAA User Manual page 66

MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
Upgrade
●
Bring the firmware file to the drop box or click the drop box to browse for the firmware
file, and then click the UPGRADE button.
Do not disconnect the power or network cable during firmware UPGRADE.
[ CAUTION ]
Setup Export
●
Current configurations for the camera can be saved as a file by clicking the EXPORT button.
Setup Import
●
The exported configuration file from a reference camera or a backup configuration can
be imported and configured/reloaded onto other cameras.
[ NOTE ]
• SETUP EXPORT/SETUP IMPORT can only be used on the same camera models with
the same firmware. This feature is not intended for the configuration of multiple units or
for firmware upgrades.
• When the encrypted System configuration file with the password is imported, type the
password at SETUP>SYSTEM>SECURITY>EXPORT/IMPORT with the SAME password
which was used in exporting the system configuration file from the reference camera.
Otherwise, 'INVALID FILE' error appears.
3-5-6. Logs & Report
● Logs
The log file records the story into the unit since the system restarts.
> DATABASE CAPACITY: Shows the useable system memory space for Log file.
> SEARCH CONDITION: Allows you to search the log as per the type. E.g. System,
Access, Event and Media, Start-End date and Start-End time.
> LOG LIST: Shows the logs as per the search.
● Logs Server
Mark ENABLE checkbox to receive log data from camera to server.
> TLS Encryption: Mark checkbox to encrypt the communication data.
> Type: Selects the network protocol to connect the server.
> Format: Selects the log protocol.
> Server address: Inputs the server address.
> Server port: Inputs the server port.
● Report
Provides overall information about the server status.
67