Table of Contents
Advertisement
MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
> Mark USE MAIL SERVER checkbox to set the mailing server.
• MAIL SERVER : Enter the host name or IP addresses for the mail servers. If a host
name is used, a valid DNS server must be specified in the Network-Basic settings.
• PORT : Enter the port number of the mail server.
> Mark ENABLE USE(SMTP) AUTHENTICATION checkbox if the mail server requires
authentication.
• USER NAME : Enter the user name as provided by the network administrator.
• PASSWORD : Enter the password as provided by the network administrator.
• LOGIN METHOD : Select one for SMTP authentication method allowed.
[ NOTE ]
If a PLAIN or LOGIN mechanism is negotiated, the camera sends the user name
and password to the SMTP server. The LOGIN mechanism is supported by Microsoft,
as well as some other clients. Most other clients support the PLAIN authentication
mechanism. Since the vast majority of Email clients support only PLAIN or LOGIN,
mail server administrators will probably want to consider using STARTTLS to provide
an encryption "tunnel" between the client and server to protect the user name and
password.
> RECEIVER LIST : Enter the recipient's email addresses as the receivers.
> E-MAIL(SMTP) TEST : Enter the recipient's email address in RECEIVER and click
the TEST button to test if the mail servers are functioning and the email address is
valid.
50
Advertisement
Table of Contents
