Table of Contents
Advertisement
MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
To add a subnet of network addresses, these must be added in CIDR
[ NOTE ]
(Classless Inter-Domain Routing) notation. For example: entering 192.168.1.0/24 will
add all the addresses in the range 192.168.1.1 to 192.168.1.254. Contact your network
administrator for more detail. If the network camera is accessed via a proxy server, the
IP address for the proxy server must be added as an allowed address.
ONVIF
●
> Mark ENABLE WS SECURITY to provide the ONVIF compliance.
Video Stream
●
> ENABLE RTSP AUTHORIZATION : If marked, the authorization is required when the
RTSP is requested.
> ENABLE JPEG SNAPSHOT AUTHORIZATION : If marked, the authorization is required
when the Jpeg snapshot image is requested.
> ENABLE JPEG/HTTP PUSH AUTHORIZATION : If marked, the authorization is required
when the Jpeg/HTTP PUSH image is requested.
Export / Import
●
> Mark ENABLE ENCRIPTION FOR EXPORT AND IMPORT FILE :
System configuration file, which is exported at SETUP>SYSTEM>MAINTENANCE>
SETUP EXPORT, is encrypted with the password herein.
THIS PASSWORD MUST BE USED when System configuration file is
[ NOTE ]
imported by other cameras if the file was exported with the password.
> If the checkbox is not marked, system configuration file is exported without encryption.
59
Advertisement
Table of Contents
