Multi Board - HP Pavilion DM1-2060 Maintenance And Service Manual

b. Release the wireless antenna cables (2) from the clips and routing channels built into the left
and right sides of the display enclosure, and remove the wireless antenna transceivers and
cables.
Reverse this procedure to reassemble and install the display assembly.

Multi board

Description
Multi board (includes USB and RJ-45 ports, and cable)
Before removing the multi board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. hard drive cover (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Display assembly (see
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Top cover on page 50).
Display assembly on page
38).
58).
Component replacement procedures
Spare part number
611692-001
63