HP Pavilion DM1-2060 Maintenance And Service Manual page 53

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
Remove the hard drive or the solid-state drive:
1. Position the computer upside down on a flat surface, with the front toward you.
2. Disconnect the drive connector (1).
3. Grasp the left Mylar tab (2) on the drive, and then pull up to remove the drive (3).
4. If it is necessary to replace the hard drive bracket or connector, follow these steps:
a. Disconnect the hard drive connector (1) from the hard drive.
b. Remove the 4 isolators (2) from the 4 corners of the hard drive bracket.
c. Remove the 4 PM3.0×3.5 screws (3) that secure the hard drive bracket to the hard drive or
solid-state drive.
Battery on page 36).
WLAN module on page 38).
Component replacement procedures 45