Fan - HP Pavilion DM1-2060 Maintenance And Service Manual

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. hard drive cover (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Display assembly (see
f. Security cable bracket (see
g. System board (see
h. Heat sink (see
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Remove the 2 PM2.0×3.5 screws (2) that secure the fan to the system board.
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Top cover on page 50).
Display assembly on page
Security cable bracket on page
System board on page
Heat sink assembly on page
38).
58).
64).
66).
69).
Component replacement procedures
Spare part number
611688-001
71