Speakers - HP Pavilion DM1-2060 Maintenance And Service Manual

Speakers

Description
Speakers (include cables)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
9. Remove the Bluetooth module (see
Remove the speakers:
1. Position the computer right-side up, with the front toward you and the display open as far as
possible.
2. Disconnect the speaker cable (1) from the system board.
3. Remove the 2 PM2.0×5.0 screws (2) that secure the speaker assembly to the base enclosure.
4. Remove the speaker assembly(3).
Reverse this procedure to install the speakers.
56 Chapter 4 Removal and replacement procedures
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Top cover on page 50).
Bluetooth module on page
Spare part number
580064-001
38).
55).