Wireless Button Board - HP Pavilion DM1-2060 Maintenance And Service Manual

Wireless button board

Description
Wireless button board (includes cable)
Before removing the wireless button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the wireless button board:
1. Position the top cover upside down, with the front toward you.
2. Remove the PM2.0×3.5 screw (1) that secures the wireless button board to the top cover.
3. Remove the wireless button board (2).
Reverse this procedure to install the wireless button board.
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Top cover on page 50).
Spare part number
611691-001
38).
Component replacement procedures 53