To Install Sound Support - HP OmniBook 2000 Evaluator Manual

Using Windows NT 4.0
Installing Windows NT 4.0
5. Select the Chips Video Accelerator (64300/10 65535/40/45/48/50/54), then click
OK.
6. Click Yes to confirm.
7. Click OK to accept that the driver was installed correctly.
8. Click Close in the Display Type window. (The new driver will not take effect
until after Windows NT has restarted.)
9. Click Close in the Display Properties window.
10. Click Yes to restart the computer.
11. When Windows NT restarts, it will inform you that a new graphics driver has
been installed.
12. Click OK.
13. Select one of the following resolutions, then click Test, then click OK.
OmniBook 2000/5700CT 800x600 65,536 Colors
OmniBook 5700CTX 1024x768 65,535 Colors
14. If the graphic is correctly listed, click Yes, otherwise click No and change the
setting.
15. Click OK.

To install sound support

Requirements
OmniBook 2000/5700 with Windows NT 4.0 installed.
OmniBook 2000/5700 driver for sound support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\NT\SOUND.
1. From Control Panel, double-click Multimedia, then click Devices.
2. Select Audio Devices, then click Add.
3. Select Unlisted or Updated Driver, then click OK.
4. Enter the directory of the sound drivers, then click OK.
5. Select the CrystalWare Audio Driver, then click OK.
5-6