To Update The Bios - HP OmniBook 2000 Evaluator Manual
Hp omnibook 2000: user guide
Hide thumbs
Also See for OmniBook 2000:
- User manual (69 pages) ,
- Service manual (119 pages) ,
- Installation and setup manual (101 pages)
Table of Contents
Advertisement
Service Centers will replace a defective hard disk drive with a blank hard drive. You
can then program the drive using the Recovery CD or your custom build process.
To update the BIOS
Hewlett-Packard may update the BIOS to enhance the capabilities of the OmniBook
2000/5700. Updates will be available from HP Electronic Support Services. Refer to
the OmniBook Support chapter (page 8-23) for more information.
Important
Because a BIOS update replaces the previous version, it is essential that you follow
these instructions exactly. The BIOS update process resets the configuration settings
in the System Configuration Utility except for the PC Identification and Passwords.
1. Shut down the OmniBook.
2. Undock.
3. Plug in the ac adapter.
4. Remove any PC cards.
5. Insert the BIOS Update disk.
6. Press the Reset button.
7. Choose the correct language.
8. Press C when prompted. This starts a process that takes approximately one
9. Press the Reset button when prompted.
minute.
Do not interrupt the update process.
Recovering Files, Drivers, and Applications
Introduction
1-15
Advertisement
Table of Contents
