Installing Cards; To Install A Xircom Ethernet Iips Pc Card - HP OmniBook 2000 Evaluator Manual
Hp omnibook 2000: user guide
Hide thumbs
Also See for OmniBook 2000:
- User manual (69 pages) ,
- Service manual (119 pages) ,
- Installation and setup manual (101 pages)
Table of Contents
Advertisement
Using Windows NT 4.0
Installing Cards
Installing Cards
This section describes how to install the following:
PC card support.
Xircom Ethernet IIps PC card.
3Com 3C562 EtherLink III LAN+33.6 Modem PC card.
Intel EtherExpress PRO/100B PCI LAN adapter.
To install a Xircom Ethernet IIps PC card
Requirements
OmniBook 2000/5700 with Windows NT 4.0 installed.
Xircom Ethernet IIps PC card.
Windows NT 4.0 CD-ROM.
Configuration
I/O Port: 0x300.
Memory Address: 0xD4000.
Interrupt: 11.
Mode: I/O Mode.
Cable Type: Auto Detect.
This procedure assumes that Windows NT Networking has not been installed.
1. Insert the PC card and restart Windows NT 4.0.
2. From Control Panel, double-click Network.
3. Click Yes to begin the Windows NT Network Installation.
4. Check Wired to network, then click Next.
5. Click Select from list, select the Xircom CreditCard Ethernet IIps, then click OK.
5-12
Advertisement
Table of Contents
