Installing Windows 95; To Prepare For Software Installation - HP OmniBook 2000 Evaluator Manual

Installing Windows 95

This section describes how to set up the operating system and drivers including the
following:
Reformatting the hard drive.
Installing Windows 95A.
Installing power management support.
Installing video support.

To prepare for software installation

1. Insert the OmniBook 2000/5700 Support Utility Disk in the A drive.
2. Restart the OmniBook 2000/5700.
3. Choose Exit to MS-DOS from the MS-DOS menu. The Support Utility Disk will
load the Internal and SCSI CD-ROM drivers. Ignore any errors.
4. Type format C: /S /U.
5. Type Y to confirm format.
6. Enter a Volume label, then press Enter.
7. Insert the Recovery CD in the CD-ROM drive.
8. Go to D:\OMNIBOOK\DRIVERS\WIN95.
9. Type: XCOPY *.* C:\OMNIBOOK\DRIVERS\WIN95\ /s /e /v.
10. Go to D:\OMNIBOOK\DRIVERS\HPUTILS.
11. Type: XCOPY *.* C:\OMNIBOOK\DRIVERS\HPUTILS\ /s /e /v.
Using Windows 95
Installing Windows 95
3-3