Table of Contents
Advertisement
www.ti.com
After accepting the Texas Instruments and National Instruments license agreements, the progress bar
opens and shows the installation of the software, as
completed, click Finish.
5.3
Software Description and Set-Up
The BUF12800EVM software allows the user to read and write to all registers in the BUF12800 gamma
correction buffer. Furthermore, it allows programming of the OTP register on the BUF12800. The software
also permits the user to select either I
version of the software; the contents of this window are shown in
SBOU116A – September 2011 – Revised August 2016
Submit Documentation Feedback
Figure 11. BUF12800EVM Software Installation Progress
2
C address. Press the About button to verify that you have the latest
Figure 12. BUF12800EVM Software About Button
Copyright © 2011–2016, Texas Instruments Incorporated
Figure 11
illustrates. Once the installation process is
Figure 12
.
BUF12800EVM Evaluation Board and Software Tutorial
BUF12800EVM Software Setup
15
Advertisement
Table of Contents
