Table of Contents
Advertisement
BUF12800EVM Software Setup
Once the files are extracted, navigate to the BUF12800EVM folder you created on your hard drive. Locate
the setup.exe file and execute it to start the installation. The BUF12800 software installer file then opens
to begin the installation process, as shown in
After the installation process initializes, the user is given the choice of selecting the directory to install the
program. Generally, defaulting to C:\Program Files\BUF12800\ and C:\Program Files\National Instruments\
is an acceptable choice. Following this option, two license agreements are presented that must be
accepted as shown in
14
BUF12800EVM Evaluation Board and Software Tutorial
Figure 9. BUF12800EVM Software Install Window
Figure
10.
Figure 10. BUF12800EVM Software License Agreements
Copyright © 2011–2016, Texas Instruments Incorporated
Figure
9.
SBOU116A – September 2011 – Revised August 2016
www.ti.com
Submit Documentation Feedback
Advertisement
Table of Contents
