Table of Contents
Advertisement
www.ti.com
3.6
BUF12800EVM Default Jumper Settings
Figure 8
shows the default jumpers configuration for the BUF12800EVM. In general, the jumper settings of
the USB DIG Platform do not need to be changed. You may want to change some of the jumpers on the
BUF12800 Test Board to match your specific configuration. For instance, you may wish to set a specific
2
I
C address.
SBOU116A – September 2011 – Revised August 2016
Submit Documentation Feedback
Figure 8. Default Jumper Locations for BUF12800EVM
Copyright © 2011–2016, Texas Instruments Incorporated
BUF12800EVM Evaluation Board and Software Tutorial
BUF12800EVM Hardware
9
Advertisement
Table of Contents
