Step 1: Installing the faucet
F
(2 N.m
Max)
Step 2: Securing the faucet assembly
5
Shut o the water supply. Place faucet (B)
B
through the hole in countertop.
Secure the faucet (B) to the countertop using
the rubber washer (C), metal washer (D) and
mounting nut (E) provided. Tighten screws (F).
C
D
E
F
a
G
Push the 3-way quick connect assembly (G)
rmly upward and attach it to the receiving
block (a). Pull down moderately to ensure the
connection has been made.
NOTE
: Ensure the 3-way quick connect
assembly and block are installed in the
correct direction, as shown. Push up until
cannot pull down. You will hear a click.