Page 2
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure.
Diagram and Parts List Tools you will need Faucet Body Mounting Hardware A. Rubber & Metal Washer B. Mounting Nut C. Mounting Screws Adjustable Wrench Hot & Cold Waterlines Aerator Aerator Key Hex Wrench Silicone Sealant (optional) Phillips Screwdriver Safety Goggles...
Page 6
Faucet Installation Procedure 9 3/8” 4 5/8” 103mm 238mm 7/8” 8” 22mm 208mm 1 3/8” 35mm 1 3/4” 46mm 1 3/8” ~1 1/2” 35~38mm 2 x 9/16-24UNEF Installer Tip: Shut off main water supply before installing new faucet.
Page 7
Step 1. Remove mounting hardware Remove the mounting screws (2C), mounting nut (2B), and rubber & metal washer (2A) from the mounting pipe. Step 2. Faucet installation Insert faucet body (1) into hole in countertop. Install mounting hardware (2A, B, C) from underneath the countertop.
Page 8
Step 3. Secure mounting hardware Adjust direction of faucet body (1) so that handle is on right side of faucet. Tighten mounting nut (2B) until snug. Tighten mounting screws (2C) to nut with Phillips screwdriver until snug. Step 4. Connect waterlines to main valve Attach waterlines (3) to angle stops and tighten until snug.
Page 9
Step 5. Flush faucet After installing faucet, remove aerator (4) with included aerator key (5). Turn water on for 30 seconds to remove any debris. Reassemble aerator (4).
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Locking nut has come loose or Remove button located at top of handle. cartridge needs to be reseated.
Page 12
Maintenance - Cartridge Replacement Step 1: Remove button located at the top of the handle. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by hand. Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge.
Page 13
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty...
Page 15
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...