Sanyo PLC-XT35 Owner's Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLC-XT35
  6. Owner's manual

Sanyo PLC-XT35 Owner's Manual

Multimedia projector
Hide thumbs Also See for PLC-XT35:
Table of Contents

Advertisement

Quick Links

Download this manual
Multimedia Projector
PLC-XT35
MODEL
PLC-XT35L
PLC-XT35K
Owner's Manual
*
(*Models without lens.)

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLC-XT35

Summary of Contents for Sanyo PLC-XT35

  • Page 1 Multimedia Projector PLC-XT35 MODEL PLC-XT35L PLC-XT35K (*Models without lens.) Owner’s Manual...

  • Page 2: Features And Design

    Features and Design Compact Design ◆ This projector is designed compact in size and Power Management ◆ weight. It is easy to carry and installed anywhere you The Power management function reduces power wish to use. consumption and maintains lamp life (p.53). Functionally Rich ◆...

  • Page 3: Table Of Contents

    Table of Contents Features and Design . . . . . . . . . . . . . . . .  Input Selection . . . . . . . . . . . . . . . . . . . 34 Table of Contents .

  • Page 4: To The Owner

    Your SANYO product is designed and manufactured with high quality materials DO NOT SET THE PROjECTOR IN and components which can be recycled GREASy, WET, OR SMOKy CONDITIONS SUCH AS IN A and reused.

  • Page 5: Safety Instructions

    Safety Instructions All the safety and operating instructions should be read Do not install the projector near the ventilation duct of air- before the product is operated. conditioning equipment. Read all of the instructions given here and retain them This projector should be operated only from the type for later use.

  • Page 6: Air Circulation

    Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. IMPORTANT! To ensure reliable operation of the product and to protect it from overheating, these openings must not Clean the Filter Regularly!! be blocked or covered. The projector uses a lamp which generates significant heat.

  • Page 7: Installing The Projector In Proper Directions

    Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.

  • Page 8: Moving The Projector

    Safety Instructions Moving the Projector Use the hand grip when moving the projector. Replace the lens cap and retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When the projector is not in use for an extended period, put it into a suitable case to protect the projector.

  • Page 9: Compliance

    Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number(s) : PLC-XT35, PLC-XT35L Trade Name : Sanyo...

  • Page 10: Part Names And Functions

    High temperature from light beam may damage the lens cap and result in fire hazard. u Infrared Remote Receiver (Front) ✽ i Projection Lens (for PLC-XT35/XT35K) o Adjustable Feet Back !0 Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent.

  • Page 11: Rear Terminal

    Part Names and Functions Rear Terminal q 5 BNC INPUT jACKS y S-VIDEO INPUT jACK Connect the component or composite video output Connect the S-VIDEO output signal from video signal from video equipment to VIDEO/Y, Cb/Pb, equipment to this jack (p.21). and Cr/Pr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz.
  • Page 12 Part Names and Functions Rear Terminal ✽ !0 R/C jACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). !1 AUDIO MONITOR OUTPUT jACK (VARIABLE) This jack outputs the audio signal from computer or video equipment to external audio equipment (pp.20–22).

  • Page 13: Top Control

    Part Names and Functions Top Control q WARNING TEMP . indicator u SELECT button Blinks red when the internal temperature of the – Execute the selected item (p.26). projector exceeds the operating range (pp.61, 68). – Expand or compress the image in the Digital zoom mode (p.47).

  • Page 14: Remote Control

    Part Names and Functions Remote Control q STAND-BY button ed 7 8 ( VOLUME + / – ) buttons o POINT Turn the projector off (p.25). – Select an item or adjust the value in the On- Screen Menu (p.26). w WIRED REMOTE jack – Pan the image in Digital zoom + mode (p.47). Connect the remote control cable (not supplied) to – Adjust the volume level (with Point buttons) this jack when using as a wired remote control. (p.29). e SIgNAL EMISSION indicator !0 PRESENTATION POINTER button Lights red while the laser beam is being emitted Move a pointer of the projector or a pointer for from the laser light window or a signal is being sent...
  • Page 15 Part Names and Functions Remote Control For PIN code and remote control code. !3 MENU button @0 FOCUS button Open or close the On-Screen Menu (p.26). Adjust the focus (p.30). !4 P-TIMER button @1 NO SHOW button Operate the P-timer function (p.31). Temporarily turn off the image on the screen (p.31).

  • Page 16: Remote Control Battery Installation

    Part Names and Functions Remote Control Battery Installation Open the battery Install new batteries Replace the compartment lid. into the compartment. compartment lid. Press the lid Two AAA size batteries downward and slide it. For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

  • Page 17: Remote Control Code

    Part Names and Functions Remote Control Code The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control.

  • Page 18: Installation

    22.0’ (6.7 m) 32.8’ (10.0 m) Moving the Lens For details about the Lens shift function, refer to “Lens Shift Adjustment” on page 28. The amount of lens shift range varies depending on the lens. The figures below are for PLC-XT35/XT35K. uppermost downmost leftmost...

  • Page 19: Lens Installation

    Installation Lens Installation When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Lens Release button Removing the lens Shift the lens to the center position by using the Lens shift function (see page 28).

  • Page 20: Connecting To A Computer (Digital And Analog Rgb)

    Installation Connecting to a Computer (Digital and Analog RGB) Cables used for connection • VGA Cable (HDB 15 pin)* • USB Cable • DVI-Digital Cable • Audio Cables (Mini Plug [stereo] x 2) • BNC Cable (*One cable is supplied; other cables are not supplied with the projector.) Monitor Audio Monitor...

  • Page 21: Connecting To Video Equipment (Video, S-Video)

    Installation Connecting to Video Equipment (Video, S-Video) Cables used for connection • Video Cables (RCA x 1) • Audio Cables (Mini Plug [stereo] x 2) • S-VIDEO Cable • BNC Cable • Audio Cable (RCA x 2) (Cables are not supplied with the projector.) S-video Composite Video and Audio Output Output External Audio Equipment...

  • Page 22: Connecting To Video Equipment (Component And Rgb Scart)

    Installation Connecting to Video Equipment (Component and RGB Scart) Cables used for connection • Audio Cables (Mini Plug [stereo] x 2) • Scart-VGA Cable • BNC Cable • DVI-Digital Cable (Cables are not supplied with the projector.) Component Video Digital Output RGB Scart Audio RGB Scart Output (HDCP 21-pin Input Output...

  • Page 23: Connecting The Ac Power Cord

    Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100–120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

  • Page 24: Basic Operation

    Basic Operation Turning On the Projector Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights green. Press the ON/STAND-BY button on the top control or the ON button on the remote control. The LAMP indicator lights red and the cooling fans start to operate.

  • Page 25: Turning Off The Projector

    Basic Operation Turning Off the Projector Press the ON/STAND-BY button on the top control or the STAND-BY button on the remote control, and “Power off?” appears on the screen. Press the ON/STAND-BY button or the STAND-BY button on the remote control again to turn off the projector. The LAMP indicator turns off and the POWER indicator starts to blink green.

  • Page 26: How To Operate The On-Screen Menu

    Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Top Control Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. MENU button Press the MENU button on the top control or the remote control to display the On-Screen Menu.

  • Page 27: Menu Bar

    Basic Operation Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 66–67 . The menu bar displays changes depending on the input signals. Guide Window System [PC Adjust] Image Adjust Setting Menu Show the selected Select a Adjust Adjust the picture Set the projector’s...

  • Page 28: Operating With Projector Control

    Basic Operation Operating with Projector Control Lens Operation Top Control The following lens operation can be made with the Lens INFO . button on the top control. button Press the Lens button to enter each lens operation mode. LENS MENU The selected adjustment display appears on the screen. button button POINT...

  • Page 29: Sound Adjustment

    Basic Operation Sound Adjustment Direct Operation Top Control VOLUME +/– buttons Volume Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE button on the remote control to temporarily Remote Control...

  • Page 30: Operating With Remote Control

    Basic Operation Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. FREEZE button Remote Control Press the FREEZE button on the remote control to freeze the picture on the screen.
  • Page 31 Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. “No show” disappears after 4 seconds. P-TIMER button Press the P-TIMER button on the remote control.

  • Page 32: Laser Pointer Function

    Basic Operation Laser Pointer Function This remote control emits a laser beam from the laser light window. Press the LASER button to activate the laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is pressed for more than one minute or if it is released, the laser light goes off.

  • Page 33: Wireless Mouse Operation

    Basic Operation Wireless Mouse Operation The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable (p. 20). When the Pointer function is used, the wireless mouse is not available.

  • Page 34: Input Selection

    Input Selection Input Remote Control Remote Control button operation INPUT buttons RGB (Scart) RGB (PC digital) Remote Control Operation Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the RGB (AV HDCP) remote control. The input source appears on the screen as you press each button.

  • Page 35: Input Source Selection

    Input Selection Input Source Selection Menu Operation Input Menu Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Input Menu icon. Use the Point buttons to move the red arrow pointer to the desired input and then press the SELECT button.

  • Page 36: Video System Selection

    Input Selection Video System Selection Press the MENU button to display the On-Screen AV System Menu (Video or S-Video) Menu. Use the Point buttons to move the red frame pointer to the AV System Menu icon. Use the Point buttons to move the red arrow AV System Menu icon pointer to the desired system and then press the The selected system is...

  • Page 37: Computer Adjustment

    Computer Adjustment Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings.

  • Page 38: Auto Pc Adjustment

    Computer Adjustment Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Direct Operation Remote Control The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control. AUTO PC button Menu Operation PC Adjust Menu...

  • Page 39: Manual Pc Adjustment

    Computer Adjustment Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
  • Page 40 Computer Adjustment Display area H Use the Point buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point buttons to adjust the vertical area displayed by this projector. Reset Move the red frame pointer to To reset the adjusted data, select Reset and press the the desired item and press the SELECT button.

  • Page 41: Image Level Selection

    Image Level Selection Image Level Selection Press the MENU button to display the On-Screen Image Menu icon Image Menu Menu. Use the Point buttons to move the red frame pointer to the Image Menu icon. Use the Point buttons to move the red frame pointer to the desired image level and then press the Move the red frame pointer SELECT button.

  • Page 42: Image Adjustment

    Image Adjustment Image Adjustment Press the MENU button to display the On-Screen *The figure below shows for video signal input. Menu. Use the Point buttons to move the red Image Adjust Menu frame pointer to the Image Adjust Menu icon. Use the Point buttons to move the red frame pointer to the desired item and then press the SELECT Image Adjust Menu icon...
  • Page 43 Image Adjustment Sharpness Press the Point button to decrease the sharpness of the image; press the Point button to increase the sharpness of the image (from 0 to 15). Gamma Use the Point buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
  • Page 44 Image Adjustment Reset To reset the adjusted data, select Reset and press the Image Level Menu SELECT button. A confirmation box appears and then select Move the red frame [Yes]. All adjustments will return to their previous figures. pointer to an image item to be set and Store then press the...

  • Page 45: Screen Adjustment

    Screen Adjustment Screen Adjustment Press the MENU button to display the On-Screen Screen Menu Menu. Use the Point buttons to move the red frame pointer to the Screen Menu icon. Use the Point buttons to move the red frame Screen Menu icon pointer to the desired function and then press the SELECT button.

  • Page 46: Screen Size Adjustment (Computer Signals)

    Screen Adjustment Screen Size Adjustment (Computer Signals) Select the desired screen size that conforms to the input signal source. Screen Menu Normal Provide the image to fit the screen size. Screen Menu icon True Move the red frame pointer Provide the image in its original size. When the original to the desired function and image size is larger than the screen size (1024 x 768), the press the SELECT button.
  • Page 47 Screen Adjustment For zooming in and out the images ✔ Notes: Digital zoom + • The projector cannot display any Select Digital zoom +. The On-Screen Menu disappears and resolution higher than 1600 x 1200. If “D. zoom +”appears. Press the SELECT button to expand your computer’s screen resolution is the image size. Use the Point buttons to pan the ed7 8 higher than that, lower the resolution...

  • Page 48: Screen Size Adjustment (Video, Component Signals)

    Screen Adjustment Screen Size Adjustment (Video, Component Signals) Press the MENU button to display the On-Screen Screen Menu Menu. Use the Point buttons to move the red frame pointer to the Screen Menu icon. Use the Point buttons to move the red frame Screen Menu icon pointer to the desired function and then press the SELECT button.

  • Page 49: Setting

    Setting Setting This projector has a Setting menu that allows you to set up Setting Menu (Language) the other various functions described below. Press the MENU button to display the On-Screen Setting Menu icon Menu. Use the Point buttons to move the red frame pointer to the Setting Menu icon.
  • Page 50 Setting Logo Logo (Logo and Logo PIN code lock settings) This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. ✔ Note: • When “On” is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected. Logo select This function decides on the starting-up display from among following options.
  • Page 51 Setting Logo PIN code lock Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Off ... The screen logo can be changed freely from the Logo Menu (p.54). On .... The screen logo cannot be changed without a Logo PIN code.
  • Page 52 Setting Remote control Remote control The eight different remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). The same code should set on both the projector and the remote control.
  • Page 53 Setting Power management Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period. Time left before the lamp is off. If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal”...
  • Page 54 Setting Fan control Fan control This function is used to set the cooling fans’ operation to the projector’s setting environment. Set this function properly in accordance with the projector’s installation method. Otherwise, the cooling fans will not work properly and that causes malfunctions of the projector and decreases the lamp life.
  • Page 55 Setting PIN code lock PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off ... Unlocked. On1 ..Enter the PIN code every time turning on the projector. On2 ..
  • Page 56 Setting Change the PIN code Change the PIN code The PIN code can be changed to your desired four-digit number. Press the Point buttons to select “PIN code change” and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code. CAUTION: WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN...
  • Page 57 Setting Filter counter Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon (yellow) appears on the screen and the WARNING FILTER indicator lights orange, notifying the cleaning is necessary.

  • Page 58: Maintenance And Filter Cleaning

    Maintenance and Filter Cleaning Cleaning the Filter Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon (yellow or red) appears on the screen and the WARNING FILTER indicator lights or blinks, clean the filter immediately.

  • Page 59: Lamp Replacement

    See “Resetting the Lamp Counter” on the next page. ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. Model No . of your projector : PLC-XT35, PLC-XT35L, PLC-XT35K ● Replacement Lamp Type No . : POA-LMP116 (Service Parts No.

  • Page 60: Resetting The Lamp Counter

    Maintenance and Filter Cleaning Resetting the Lamp Counter Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP REPLACE indicator stops lighting and the Lamp replacement icon disappears. Lamp counter Press the MENU button to display the On-Screen Menu.

  • Page 61: Warning Indicators

    Maintenance and Filter Cleaning Warning Indicators The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING indicators and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING TEMP. Top Control indicator is blinking red. When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector.

  • Page 62: Cleaning The Projection Lens

    Maintenance and Filter Cleaning Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

  • Page 63: Appendix

    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 20–22. – Make sure all equipment is connected to AC outlet and the power is turned on. –...
  • Page 64 Appendix off and wait until condensation evaporates. – Projecting from the excessive slant angle to the screen may cause keystone distortion and partial imperfect focus. See page 18. Picture is not bright enough . – Check if "Contrast" or "Brightness" are adjusted properly See page 42. –...
  • Page 65 Appendix Capture function does not work . – Check the connection and the Input signal to see if there is signal. – Check the batteries. The Remote Control does not work . – Make sure no obstruction is between the projector and remote control. –...

  • Page 66: Menu Tree

    Appendix Menu Tree Input Input 1 RGB (PC Analog) Go to System RGB (Scart) RGB (PC Digital) RGB (AV HDCP) Quit Input 2 Go to System Video Go to System Component Go to System Quit Input 3 Auto Video Go to System S-video Go to System Quit...
  • Page 67 Appendix PC Adjust Setting Auto PC adj. Language 12 languages provided Fine sync 0–31 Quit Total dots Logo Logo select Horizontal Off/Default/User Vertical Capture Current mode H-sync freq. Yes/No V-sync freq. Logo PIN code lock Quit On/Off Clamp Logo PIN code change Display area H Quit Display area V...

  • Page 68: Indicators And Projector Condition

    Appendix Indicators and Projector Condition Check the indicators for the projector condition. WARNING TEMP . indicator Indicators Projector Condition WARNING POWER LAMP TEMP . green The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector.
  • Page 69 Appendix WARNING FILTER indicator Indicators Projector Condition WARNING POWER LAMP FILTER green orange The filter is clogged. Stop using the projector immediately and clean or replace the filter (see below). Filter warning red icon – – The Filter counter reached a set time. Clean or replace the filter as soon as possible.

  • Page 70: Compatible Computer Specifications

    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes. ON-SCREEN H-Freq . V-Freq . ON-SCREEN H-Freq .
  • Page 71 Appendix When an input signal is digital from the DVI terminal, refer to the chart below. PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu. ON-SCREEN H-Freq . V-Freq . ON-SCREEN H-Freq .

  • Page 72: Technical Specifications

    Projection Image Size (Diagonal) Adjustable from 30” to 300” (PLC-XT35/XT35K) Throw Distance 3.9’–32.8’ (1.2 m–10.0 m) (PLC-XT35/XT35K) Projection Lens F=1.7 to 2.1, f=33 to 43 mm with motor zoom and focus (PLC-XT35/XT35K) Projection Lamp 330 W Interface Input 1 Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1...

  • Page 73: Optional Parts

    Remote Control and Batteries VGA Cable USB Cable Control Cable Lens Cap (for PLC-XT35/XT35K) Lens Mount Cover (for PLC-XT35L/XT35K) PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

  • Page 74: Pj Link Notice

    Appendix PJ Link Notice This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input PJLink Input Parameter...

  • Page 75: Configurations Of Terminals

    Appendix Configurations of Terminals INPUT 1/ANALOG OUT Terminal: Analog RGB (Mini D-sub 15 pin) Red (R/Cr) Input/Output +5V Power/ ----- Green (G/Y) Input/Output Ground (Vert.sync.) Blue (B/Cb) Input/Output Ground/ ----- DDC Data / ----- ----- Ground (Horiz.sync.) Horiz. sync. Input/Output (Composite H/V sync.) Ground (Red) Vert.

  • Page 76: Pin Code Number Memo

    Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No . Factory default set No: 1 2 3 4* Logo PIN Code Lock No .

  • Page 77: Dimensions

    Appendix Dimensions 13.7 (348.1) Unit: inch (mm) 5º MAX 1.65 (41.9) 11.10 (282) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 7.87 (200)
  • Page 78 SANyO Electric Co ., Ltd . KP3AL -A...

This manual is also suitable for:

Plc-xt35lPlc-xt35k

Table of Contents