Table of Contents
Advertisement
Basic Operation
NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button.
P-TIMER button
Press the P-TIMER button on the remote control. The P-
Timer display "00:00" appears on the screen and the
countdown starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
KEYSTONE button
Press the KEYSTONE button on the remote control. The
"Keystone" appears on the screen.
Use the Point
ed
The keystone adjustment can be stored (see page 50).
Reduce the upper width
with the Point
e
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
32
buttons to correct keystone distortion.
Reduce the lower width
button.
with the Point
"No show" disappears after 4 seconds.
P-Timer display
Remote Control
P-TIMER
button
d
button.
✔
Note:
•See the previous page for the description of
other buttons.
KEYSTONE
button
NO SHOW
button
Advertisement
Table of Contents
