Removal and Replacement Procedures
4. Remove the mini PCI communications board by following
these steps:
a. Turn the tablet panel side down with the power switch
b. Remove the two PM2.0 × 4.0 screws
c. Lift the back edge of the mini PCI communications/
d. Remove the mini PCI communications/memory
✎
The mini PCI communications/memory expansion slot cover is
included in the Miscellaneous Plastics/Hardware kit,
310678-001.
Figure 5-3. Removing the Memory Expansion/Mini PCI
Communications Compartment Cover
5–6
and jog dial facing you.
mini PCI communications/memory expansion slot cover
to the tablet PC (Figure 5-3).
memory expansion slot cover up and swing it forward
expansion slot cover.
1
that secure the
Maintenance and Service Guide
2
.