Docking Station - Compaq tc1000 Maintenance And Service Manual

5.12 Docking Station

Docking station
Docking stand and pivot arm
Top case
Board assembly
Bottom case
Perform the following steps to disassemble the docking station:
1. Position the docking station bottom side up, resting on the
docking stand, with the bottom case facing you.
2. Remove the four TM2.5 × 7.0 screws that secure the top case
to the bottom case (Figure 5-30).
Figure 5-30. Removing the Top Case Screws
Maintenance and Service Guide
Docking Station Components
Spare Part Number Information
Removal and Replacement Procedures
311063-001
311189-001
311190-001
311192-001
311191-001
5–37