Supermicro SuperServer SYS-2029U-T Series User Manual page 117

State [Normal]
Alarm enabled state
Use this setting to establish the non-critical threshold alarm. Choices are 1 and 0.
Sensor Type [Latched dirty shutdown count]
Value <6>
Sensor Type [Power on time]
Value <7172661 S>
Sensor Type [Up time]
Value <345287 S>
Sensor Type [Power cycles]
Value <1783>
Sensor Type [FW error count]
Value <8>
Sensor Type [Unlatched dirty shutdown count]
Value <138>
Modify non-critical thresholds
Controller temperature [C] 98
Media temperature [C]
Percentage remaining [%] 50
Apply changes
Press <Enter> to apply changes.
Update firmware
Specify the firmware image to load on the DIMMs on the next system restart and select
Update.
Current firmware version: 01.00.00.5127
Selected firmware version:
File:
Press <Enter> and type in the file path relative to the root directory of the device
containing the new firmware image file, such as "\firmware\newFirmware.bin".
Staged firmware version: N/A
82
None
117
Chapter 6: UEFI BIOS